Business hours: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Russian rubble
- EUR
  Euro
- USD
  USA Dollar
- No elements found. Consider changing the search query.
- List is empty.
Рус

Home
Catalog
Metals / Polymers
Polyethylene Terephthalate (polyester, PET, PETP), film, thickness 0.0035 mm, L 0.5 m, coil width 490 mm

Polyethylene Terephthalate (polyester, PET, PETP), film, thickness 0.0035 mm, L 0.5 m, coil width 490 mm

Order only

Polyethylene Terephthalate (polyester, PET, PETP), film, thickness 0.0035 mm, L 0.5 m, coil width 490 mm

Сроки поставки

Сроки поставки данного товара уточняются.

Manufacturer: Sigma Aldrich
Product id: RA-817572
Category: Metals / Polymers
Cat number: GF87759680-1EA

CAS: -

Characteristics
Description

Recommended products

Stainless steel - AISI 304 foil, Fe/Cr18%/Ni10%, thickness 0.1 mm, length 2 m, temper hard

Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 rod, 200mm x 2.0mm diameter, annealed

Polypropylene (PP), film, thickness 0.03 mm, L 5 m, condition biaxially oriented

Havar® - high-strength non-magnetic alloy, Co42.5Cr20Ni13FeWMoMn foil, 25 x 25mm, 0.004mm thickness, as rolled, not light tested (nlt)

Stainless Steel - AISI 304 alloy, FeCr18Ni10 1000mm rod, 2.0mm diameter, as drawn

Dural® - aluminum-copper-magnesium alloy, Al95Cu4Mg1 500mm tube, 0.53mm outside diameter, 0.051mm wall thickness, 0.428mm inside diameter, as drawn

Polyphenylsulfone (PPSU), rod, diam. 20 mm, L 100 mm, black

Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 50 x 50mm, 0.15mm thickness, annealed

Copper-beryllium alloy, Cu98Be2 1000m wire, 0.25mm diameter, hard

Polycarbonate (PC), sheet, thickness 5 mm, size 150 × 150 mm, clear

Polyethylene Terephthalate (polyester, PET, PETP), metallized film, thickness 0.012 mm, size 300 × 300 mm, ohms/square 2

Monel® alloy 400, Ni65Cu33Fe2 foil, 150 x 300mm, 0.030mm thickness, annealed, light tight (lt)

Aluminum-magnesium alloy, Al97Mg3 foil, 25 x 25mm, 0.06mm thickness, as rolled, light tight (lt)

Stainless Steel - AISI 304 alloy, FeCr18Ni10 100mm tube, 2.34mm outside diameter, 0.32mm wall thickness, 1.7mm inside diameter, hard

Havar® - high-strength non-magnetic alloy, Co42.5Cr20Ni13FeWMoMn foil, 100 x 100mm, 0.01mm thickness, as rolled, light tight (lt)

Brass alloy, Cu63Zn37 foil, 50mm disks, 0.38mm thickness, half hard

Aluminum alloy 5251 foil, Al 97.7%/Mg 2%/Mn 0.3%, thickness 1.5 mm, size 50 × 50 mm

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 50mm disks, 0.25mm thickness, hard

Polyhydroxyalkaonate - Biopolymer (PHA), granule, 3 mm nominal granule size, weight 2000 g, condition wood flour composite

Leaded brass alloy, Cu58Zn39Pb3 100mm rod, 20.0mm diameter

This site uses cookies. By continuing to use the site, you agree to work with these files.