Business hours: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Russian rubble
- EUR
  Euro
- USD
  USA Dollar
- No elements found. Consider changing the search query.
- List is empty.
Рус

Home
Catalog
Metals / Polymers
Stainless Steel - 15-7PH alloy, FeCr15Ni7Mo2.25 foil, 150 x 150mm, 0.05mm thickness, annealed, precipitation hardenable, light tight (lt)

Stainless Steel - 15-7PH alloy, FeCr15Ni7Mo2.25 foil, 150 x 150mm, 0.05mm thickness, annealed, precipitation hardenable, light tight (lt)

Order only

Stainless Steel - 15-7PH alloy, FeCr15Ni7Mo2.25 foil, 150 x 150mm, 0.05mm thickness, annealed, precipitation hardenable, light tight (lt)

Сроки поставки

Сроки поставки данного товара уточняются.

Manufacturer: Sigma Aldrich
Product id: RA-985400
Category: Metals / Polymers
Cat number: GF30428377-5EA

CAS: -

Characteristics
Description

Recommended products

Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 foil, 10mm disks, 0.125mm thickness, annealed

Iron-Nickel-Cobalt alloy, Fe63Ni32Co5 100mm rod, 10mm diameter, as drawn

Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 200mm tube, 25.4mm outside diameter, 1.65mm wall thickness, 22.1mm inside diameter, annealed

Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn foil, 150 x 150mm, 0.075mm thickness, annealed, light tight (lt)

Brass alloy, Cu63Zn37 foil, 50mm disks, 0.0125mm thickness, half hard

Monel® alloy 400, Ni65Cu33Fe2 foil, 50 x 50mm, 0.075mm thickness, annealed, light tight (lt)

Polyamide - Nylon 6 (PA 6), film, thickness 0.025 mm, L 5 m, colorless

Boron nitride rod, 32 mm diameter, length 25 mm, condition hot-pressed

Brass alloy, Cu70Zn30 200mm tube, 3.56mm outside diameter, 0.41mm wall thickness, 2.74mm inside diameter, as drawn

Aluminum-magnesium alloy, Al97Mg3 foil, 100 x 100mm, 0.06mm thickness, as rolled, light tight (lt)

Tungsten-rhenium alloy, W97Re3 1m wire, 0.5mm diameter, annealed

Polyethylene Terephthalate (polyester, PET, PETP), mesh, nominal aperture 21ám, size 500 × 500 mm, monofil diameter 41ám

Quartz - fused tube, outside diameter 23.0 mm, length 500 mm, wall thickness 1.5 mm

Polyetheretherketone (PEEK), film, thickness 0.125 mm, L 2 m, transparent pale amber

Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 foil, 15mm disks, 0.043mm thickness, annealed

Copper/Beryllium foil, Cu 98%/Be 2%, thickness 0.45 mm, 10 mm diameter, temper annealed

Tungsten-copper alloy, W72Cu28 sheet, 50 x 50mm, 3.15mm thickness

Polyethylene Terephthalate (polyester, PET, PETP), film, thickness 0.075 mm, L 10 m, coil width 914 mm

Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 25mm disks, 0.5mm thickness, annealed

Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 1m coil, 0.125mm thickness, half hard

This site uses cookies. By continuing to use the site, you agree to work with these files.