Business hours: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Russian rubble
- EUR
  Euro
- USD
  USA Dollar
- No elements found. Consider changing the search query.
- List is empty.
Рус

Home
Catalog
Metals / Polymers
Polyetheretherketone (PEEK), granule, 6 mm nominal granule size, weight 100 g, condition medium viscosity

Polyetheretherketone (PEEK), granule, 6 mm nominal granule size, weight 100 g, condition medium viscosity

Order only

Polyetheretherketone (PEEK), granule, 6 mm nominal granule size, weight 100 g, condition medium viscosity

Сроки поставки

Сроки поставки данного товара уточняются.

Manufacturer: Sigma Aldrich
Product id: RA-809739
Category: Metals / Polymers
Cat number: GF38152100-1EA

CAS: -

Characteristics
Description

Recommended products

Copper-beryllium alloy, Cu98Be2 foil, 4mm disks, 0.02mm thickness, half hard

Inconel® alloy 718 - heat resisting alloy, Ni53Fe19Cr19NbMoTi foil, 25 x 25mm, 0.25mm thickness, annealed

Polyethylene - Low Density (LDPE), film, thickness 0.035 mm, size 150 × 150 mm

Alumina washer, size m6 (bs4320), length 10 pcs, outside diameter 12.10 - 12.50mm

Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 8mm disks, 0.2mm thickness, annealed

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 10mm disks, 0.075mm thickness, hard

Polysulfone (PSU), film, thickness 0.9 mm, size 300 × 300 mm

Phosphor bronze alloy, Cu94Sn6 foil, 150 x 150mm, 0.076mm thickness, as rolled, light tight (lt)

Constantan - resistance alloy, Cu55Ni45 foil, 10mm disks, 0.0125mm thickness, as rolled

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 10mm disks, 0.125mm thickness, annealed

Aluminum-magnesium-silicon alloy, Al98Mg1Si1 100mm tube, 25.4mm outside diameter, 3.25mm wall thickness, 18.9mm inside diameter, hard

Brass alloy, Cu63Zn37 1000m wire, 0.25mm diameter, hard

Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn foil, 50mm disks, 0.075mm thickness, annealed

Alumina/Silica fiber, tex number 205, Al2O3 80%/SiO2 20%, length 100 m, filament diameter 0.01mm

Polyamide - Nylon 11 (PA 11), rod, diam. 55 mm, L 1000 mm, grade rilsan bmn tld

Platinum-iridium alloy, Pt90Ir10 50m wire, 0.025mm diameter, as drawn

Brass alloy, Cu63Zn37 foil, 25 x 25mm, 0.05mm thickness, half hard, light tight (lt)

Polyimide (PI), film, thickness 0.025 mm, size 100 × 100 mm, grade kapton mt

Polyethylene - U.H.M.W. (UHMW PE), rod, diam. 15 mm, L 1000 mm, condition machining feedstock

Polycarbonate (PC), tube, outside diameter 9.5mm, L 1000 mm, wall thickness 1.5 mm

This site uses cookies. By continuing to use the site, you agree to work with these files.