Business hours: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Russian rubble
- EUR
  Euro
- USD
  USA Dollar
- No elements found. Consider changing the search query.
- List is empty.
Рус

Home
Catalog
Metals / Polymers
Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 25 x 25mm, 0.02mm thickness, light tight (lt)

Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 25 x 25mm, 0.02mm thickness, light tight (lt)

Order only

Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 25 x 25mm, 0.02mm thickness, light tight (lt)

Сроки поставки

Сроки поставки данного товара уточняются.

Manufacturer: Sigma Aldrich
Product id: RA-988979
Category: Metals / Polymers
Cat number: GF97814177-1EA

CAS: -

Characteristics
Description

Recommended products

Nickel-chromium alloy, Ni80Cr20 foil, 25 x 25mm, 0.005mm thickness, as rolled, not light tested (nlt)

Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 150 x 150mm, 0.02mm thickness, light tight (lt)

Brass alloy, Cu63Zn37 foil, 100 x 100mm, 1.0mm thickness, half hard

Inconel® X750 - heat resisting alloy, Ni74Cr15Fe7TiAlNb foil, 150 x 150mm, 1.0mm thickness, annealed

Aluminum/Magnesium foil, thickness 0.50 mm, Al97%/Mg 3%, diameter 50 mm, temper as rolled

Polyvinylchloride - Unplasticized (UPVC), film, thickness 0.38 mm, diam. 10 mm, clear

Polyaramid (polymetaphenylene isophthalamide), film, thickness 0.05 mm, size 150 × 150 mm, type t410

Nickel-chromium alloy, Ni80Cr20 foil, 20m coil, 2mm coil width, 0.075mm thickness, annealed

Polyvinylchloride - Unplasticized (UPVC), sheet, thickness 4.5 mm, size 150 × 150 mm, clear

Phosphor bronze alloy, Cu94Sn6 foil, 5m coil, 6mm coil width, 0.2mm thickness, hard

Monel® alloy 400, Ni65Cu33Fe2 foil, 6mm disks, 0.12mm thickness, annealed

Polyethylene Terephthalate (polyester, PET, PETP), sheet, thickness 1 mm, size 150 × 150 mm, condition amorphous

Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 4mm disks, 0.0125mm thickness, annealed

Polytetrafluoroethylene (PTFE), sheet, thickness 10 mm, size 150 × 150 mm

Nickel/Iron wire, Ni90%/Fe10%, 0.5 mm diameter, length 0.5 m, temper as drawn

Alumina tube, outside diameter 10.0 mm, length 150 mm, wall thickness 1.5 mm

Molybdenum high temperature alloy tzm, Mo99Ti0.5Zr0.1 rod, 500mm x 5.0mm diameter

Stainless steel - AISI 304L alloy, Fe/Cr18/Ni10 foil, 50 x 50mm, 0.2mm thickness, annealed

Polycarbonate (PC), rod, diam. 6.35 mm, L 1000 mm, condition machining feedstock

Manganin® - resistance alloy, Cu86Mn12Ni2 foil, 25 x 25mm, 0.02mm thickness, as rolled, light tight (lt)

This site uses cookies. By continuing to use the site, you agree to work with these files.