Business hours: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Russian rubble
- EUR
  Euro
- USD
  USA Dollar
- No elements found. Consider changing the search query.
- List is empty.
Рус

Home
Catalog
Metals / Polymers
Copper-tellurium alloy, Cu99.5Te0.5 500mm rod, 25mm diameter

Copper-tellurium alloy, Cu99.5Te0.5 500mm rod, 25mm diameter

Order only

Copper-tellurium alloy, Cu99.5Te0.5 500mm rod, 25mm diameter

Сроки поставки

Сроки поставки данного товара уточняются.

Manufacturer: Sigma Aldrich
Product id: RA-983966
Category: Metals / Polymers
Cat number: GF01136674-1EA

CAS: -

Characteristics
Description

Recommended products

Copper-beryllium alloy, Cu98Be2 foil, 25mm disks, 0.01mm thickness, as rolled

Magnetic shielding alloy, Ni77Fe14Cu5Mo4 foil, 8mm disks, 0.05mm thickness

Polyimide (PI), film, thickness 0.075 mm, L 2 m, grade kapton mt

Monel® alloy 400, Ni65Cu33Fe2 foil, 25mm disks, 0.125mm thickness, annealed

Copper-beryllium alloy, Cu98Be2 foil, 150 x 150mm, 0.05mm thickness, half hard, light tight (lt)

Nickel-beryllium-titanium alloy, Ni97.5Be1.95Ti0.5 foil, 0.5m coil, 0.2mm thickness

Tungsten-rhenium alloy, W75Re25 5m wire, 0.25mm diameter, annealed

Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 50 x 50mm, 0.0125mm thickness, hard, light tight (lt)

T2 - thermocouple alloy, Ni95(Al+Mn+Si)5 insulated wire, 20m length, 0.125mm conductor diameter, 0.004mm insulation thickness, polyester insulation

Brass alloy, Cu63Zn37 200mm rod, 2.0mm diameter, as drawn

Cellulose Acetate (CA), film, thickness 0.05 mm, size 300 × 300 mm, color high viscosity

Hastelloy® X alloy, Ni49.5Cr22Fe18Mo9Co1W 200mm rod, 9.5mm diameter

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 4mm disks, 0.2mm thickness, annealed

Polyimide (PI), metallized film, thickness 0.025 mm, size 610 × 610 mm, condition metallized on one side with 30 nm aluminum

Quartz - fused tube, outside diameter 4.0 mm, length 100 mm, wall thickness 1.0 mm

Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 100mm tube, 9.5mm outside diameter, 1.7mm wall thickness, 6.1mm inside diameter, annealed

Polymethylmethacrylate (PMMA, ACRYLIC), sheet, thickness 6 mm, size 150 × 150 mm

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 25 x 25mm, 0.015mm thickness, as rolled, light tight (lt)

Inconel® alloy 718 - heat resisting alloy, Ni53Fe19Cr19NbMoTi foil, 8mm disks, 0.25mm thickness, annealed

Polyaramid (polymetaphenylene isophthalamide), film, thickness 0.36 mm, size 150 × 150 mm, type t418

This site uses cookies. By continuing to use the site, you agree to work with these files.