Время работы: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Российский рубль
- EUR
  Евро
- USD
  Доллар США
- No elements found. Consider changing the search query.
- List is empty.
Eng

Главная
Каталог
Металлы / Полимеры
Stainless Steel - 17-7PH alloy, FeCr17Ni7 foil, 50mm disks, 0.125mm thickness, annealed - condition a, precipitation hardenable

Stainless Steel - 17-7PH alloy, FeCr17Ni7 foil, 50mm disks, 0.125mm thickness, annealed - condition a, precipitation hardenable

Под заказ

Stainless Steel - 17-7PH alloy, FeCr17Ni7 foil, 50mm disks, 0.125mm thickness, annealed - condition a, precipitation hardenable

Сроки поставки

Сроки поставки данного товара уточняются.

Производитель: Sigma Aldrich
Артикул: RA-806999
Категория: Металлы / Полимеры
Кат номер: GF19738873-50EA

CAS: -

Характеристики
Описание

Рекомендуемые товары

Constantan - resistance alloy, Cu55Ni45 foil, 50mm disks, 0.025mm thickness, as rolled

Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 25mm disks, 0.015mm thickness, as rolled

Polybutylene Terephthalate (PBT), monofilament, diam. 0.8 mm, L 50 m

Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 mesh, 300 x 300mm, 0.103mm nominal aperture, 0.066mm wire diameter, 150 x 150 wires/inch, 0.37 open area, plain weave mesh type

Chromaloy O - Resistance Alloy, Fe75Cr20Al5 1000m wire, 0.25mm diameter, annealed

Glass Sealing Alloy, Fe54Ni29Co17 foil, 10mm disks, 0.25mm thickness, annealed

Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 150 x 150mm, 0.0125mm thickness, annealed, light tight (lt)

Stainless Steel - AISI 304 alloy, FeCr18Ni10 200mm tube, 0.5mm outside diameter, 0.06mm wall thickness, 0.38mm inside diameter, as drawn

Aluminum alloy 3003 honeycomb, thickness 20 mm, Al98%/Mn 1%/Fe 0.5%/Si 0.5%, size 600 × 600 mm, cell size 6.35 mm

Nickel/Chromium rod, Ni 80%/Cr 20%, 20.0 mm diameter, length 100 mm

Waspaloy - heat resisting alloy, Ni58Cr19Co14MoTiAlFe foil, 10mm disks, 0.25mm thickness, annealed

Nickel-chromium alloy, Ni80Cr20 50m insulated wire, 0.25mm conductor diameter, 0.025mm insulation thickness, polyimide insulation

Polyimide (PI), laminate, thickness 0.1 mm, size 150 × 150 mm, polymer thickness 0.05mm

Polyethylene Terephthalate (polyester, PET, PETP), metallized film, thickness 0.036 mm, diam. 8 mm, ohms/square >2500

Stainless Steel - AISI 431 alloy, Fe82Cr16Ni2 500mm rod, 6.0mm diameter

Stainless Steel - AISI 302 alloy, FeCr18Ni8 foil, 150 x 150mm, 0.2mm thickness, hard

Aluminum-magnesium alloy, Al97Mg3 foil, 5m coil, 0.1mm thickness, as rolled

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 25 x 25mm, 0.15mm thickness, annealed

Manganese-nickel alloy, Mn88Ni12 foil, 25 x 25mm, 0.025mm thickness, as rolled, light tight (lt)

Havar® - high-strength non-magnetic alloy, Co42.5Cr20Ni13FeWMoMn foil, 50 x 50mm, 0.004mm thickness, as rolled, not light tested (nlt)

Этот сайт использует cookie. Продолжая пользоваться сайтом, вы даёте своё согласие на работу с этими файлами.