Время работы: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Российский рубль
- EUR
  Евро
- USD
  Доллар США
- No elements found. Consider changing the search query.
- List is empty.
Eng

Polypropylene (PP), metallized film, thickness 0.008 mm, L 5 m, coil width 75 mm

Под заказ

Polypropylene (PP), metallized film, thickness 0.008 mm, L 5 m, coil width 75 mm

Сроки поставки

Сроки поставки данного товара уточняются.

Производитель: Sigma Aldrich
Артикул: RA-806992
Категория: Металлы / Полимеры
Кат номер: GF19651327-1EA

CAS: -

Характеристики
Описание

Рекомендуемые товары

Polyphenylenesulfide - 40% Glass Fiber Reinforced (PPS - 40% GFR), rod, diam. 27 mm, L 200 mm

Polyimide (PI), film, thickness 0.075 mm, L 2 m, grade kapton mt

Polystyrene (PS), film, thickness 0.125 mm, size 300 × 300 mm, clear clear

Stainless steel - AISI 304L alloy, Fe/Cr18/Ni10 foil, 150 x 150mm, 0.15mm thickness, annealed

Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 foil, 25 x 25mm, 0.15mm thickness, annealed

Polyetherketone (PEK), film, thickness 0.1 mm, size 100 × 100 mm

Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 100 x 100mm, 1.0mm thickness, annealed

Brass alloy, Cu63Zn37 foil, 150 x 150mm, 6.0mm thickness, half hard

Titanium-aluminum-vanadium alloy, Ti94.5Al3V2.5 foil, 1m coil, 0.030mm thickness, annealed

Evanohm® - precision resistance alloy, Ni75Cr20Al2.5Cu2.5 foil, 50 x 50mm, 0.02mm thickness, annealed, light tight (lt)

Phosphor bronze alloy, Cu94Sn6 foil, 8mm disks, 0.076mm thickness, as rolled

Nickel silver rod, Cu 45%/Zn 43%/Ni 10%/Pb 2%, 20.5 mm diameter, length 100 mm

Brass alloy, Cu63Zn37 foil, 15mm disks, 0.01mm thickness, hard

Polyethylene - Low Density (LDPE), rod, diam. 152.4 mm, L 50 mm, natural

Polyethylene - Low Density (LDPE), film, thickness 0.063 mm, size 300 × 300 mm

Polyimide (PI), tube, outside diameter 1.05mm, L 500 mm, wall thickness 0.025 mm

Stainless Steel - AISI 430 alloy, Fe81Cr17MnSiCSP foil, 1m coil, 0.15mm thickness, annealed

Stainless Steel - AISI 304 alloy, FeCr18Ni10 mesh, 900 x 900mm, 0.38mm nominal aperture, 0.75mm thickness, 0.25mm wire diameter, 40 x 40 wires/inch, 0.37 open area, plain weave mesh

Polyimide (PI), tube, outside diameter 0.18mm, L 100 mm, wall thickness 0.02 mm

Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 40 x 200mm, 0.25mm thickness, annealed, flattened

Этот сайт использует cookie. Продолжая пользоваться сайтом, вы даёте своё согласие на работу с этими файлами.