Время работы: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Российский рубль
- EUR
  Евро
- USD
  Доллар США
- No elements found. Consider changing the search query.
- List is empty.
Eng

Polymethylpentene TPX®, rod, diam. 19 mm, L 100 mm, natural

Под заказ

Polymethylpentene TPX®, rod, diam. 19 mm, L 100 mm, natural

Сроки поставки

Сроки поставки данного товара уточняются.

Производитель: Sigma Aldrich
Артикул: RA-4999531
Категория: Металлы / Полимеры
Кат номер: GF48839046-50EA

CAS: -

Характеристики
Описание

Рекомендуемые товары

Brass alloy, Cu63Zn37 foil, 8mm disks, 0.38mm thickness, half hard

Aluminum-magnesium alloy, Al97Mg3 foil, 0.5m coil, 0.06mm thickness, as rolled

Alumina tube, outside diameter 4.0 mm, length 150 mm, wall thickness 1.0 mm

Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 50 x 50mm, 0.05mm thickness, annealed, light tight (lt)

Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn foil, 50mm disks, 0.15mm thickness, annealed

Aluminum alloy 5019 wire, Al 95%/Mg 5%, 0.12 mm diameter, length 200 m, temper hard

Stainless Steel - 17-7PH alloy, FeCr17Ni7 foil, 50 x 50mm, 0.125mm thickness, annealed - condition a, precipitation hardenable

Polyimide (PI), film, thickness 0.025 mm, size 100 × 100 mm, grade kapton cr

Polymethylmethacrylate (PMMA, ACRYLIC), rod, diam. 100 mm, L 50 mm

Polymethylpentene TPX®, rod, diam. 9.5 mm, L 1000 mm, natural

Polyamide - Nylon 6 (PA 6), film, thickness 0.025 mm, L 0.5 m, light blue

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 50 x 50mm, 0.007mm thickness, as rolled, not light tested (nlt)

Constantan - resistance alloy, Cu55Ni45 foil, 6mm disks, 0.025mm thickness, as rolled

Stainless Steel - AISI 302 alloy, FeCr18Ni8 foil, 10mm disks, 0.2mm thickness, hard

Stainless Steel - AISI 304 alloy, FeCr18Ni10 1000mm tube, 0.5mm outside diameter, 0.11mm wall thickness, 0.28mm inside diameter, hard

Polyamide - Nylon 12 (PA 12), powder, max. particle size 50micron, weight 1000 g, min. particle size 10micron

Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 15mm disks, 0.5mm thickness, annealed

Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 10mm disks, 0.0125mm thickness, hard

Inconel® alloy 718 - heat resisting alloy, Ni53Fe19Cr19NbMoTi rod, 200mm x 16mm diameter, annealed

Polyimide (PI), tube, outside diameter 1.05mm, L 100 mm, wall thickness 0.025 mm

Этот сайт использует cookie. Продолжая пользоваться сайтом, вы даёте своё согласие на работу с этими файлами.