Время работы: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Российский рубль
- EUR
  Евро
- USD
  Доллар США
- No elements found. Consider changing the search query.
- List is empty.
Eng

Polyetheretherketone (PEEK), tube, outside diameter 4.6mm, L 1000 mm, wall thickness 0.4 mm

Под заказ

Polyetheretherketone (PEEK), tube, outside diameter 4.6mm, L 1000 mm, wall thickness 0.4 mm

Сроки поставки

Сроки поставки данного товара уточняются.

Производитель: Sigma Aldrich
Артикул: RA-5008319
Категория: Металлы / Полимеры
Кат номер: GF81209695-10EA

CAS: -

Характеристики
Описание

Рекомендуемые товары

Polytetrafluoroethylene (PTFE), rod, diam. 8 mm, L 1000 mm

Titanium-aluminum-vanadium alloy, Ti90Al6V4 foil, 100 x 100mm, 0.1mm thickness, annealed

Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 foil, 4mm disks, 0.075mm thickness, annealed

Permendur 49 alloy, Co49Fe49V2 foil, 50 x 50mm, 0.1mm thickness, as rolled

Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 50 x 50mm, 0.25mm thickness, annealed

Stainless Steel - AISI 304 alloy, FeCr18Ni10 500mm tube, 5.0mm outside diameter, 0.5mm wall thickness, 4mm inside diameter, annealed

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 100 x 100mm, 0.125mm thickness, annealed

Polyethylene - U.H.M.W. (UHMW PE), rod, diam. 15 mm, L 100 mm, condition machining feedstock

Polytetrafluoroethylene (PTFE), film, thickness 0.3 mm, size 150 × 150 mm

Nickel-chromium alloy, Ni80Cr20 foil, 8mm disks, 0.10mm thickness, as rolled

Polyimide (PI), metallized film, thickness 0.075 mm, size 600 × 600 mm, condition metallized on one side with 30 nm aluminum

Cellulose Acetate (CA), film, thickness 0.25 mm, size 150 × 150 mm, natural

Polyethylene Terephthalate (polyester, PET, PETP), mesh, nominal aperture 100ám, size 500 × 500 mm, monofil diameter 70ám

Aluminum-magnesium-silicon alloy, Al98Mg1Si0.6 10m wire, 0.5mm diameter, as drawn

Polyethylene Terephthalate (polyester, PET, PETP), metallized film, thickness 0.036 mm, size 1000 × 1000 mm, ohms/square 700

Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3 foil, 15mm disks, 0.5mm thickness, annealed

Polymethylmethacrylate (PMMA, ACRYLIC), tube, outside diameter 13mm, L 1000 mm, wall thickness 1.5 mm

Polyvinylidenechloride (PVDC), film, thickness 0.0125 mm, L 10 m, coil width 300 mm

Evanohm® - precision resistance alloy, Ni75Cr20Al2.5Cu2.5 foil, 100 x 100mm, 0.02mm thickness, annealed, light tight (lt)

Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 6mm disks, 0.1mm thickness, annealed

Этот сайт использует cookie. Продолжая пользоваться сайтом, вы даёте своё согласие на работу с этими файлами.