Время работы: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Российский рубль
- EUR
  Евро
- USD
  Доллар США
- No elements found. Consider changing the search query.
- List is empty.
Eng

Iron-nickel alloy nanopowder, <100 nm particle size (BET), ≥97%

Под заказ

Iron-nickel alloy nanopowder, <100 nm particle size (BET), ≥97%

Сроки поставки

Сроки поставки данного товара уточняются.

Производитель: Sigma Aldrich
Артикул: RA-965024
Категория: Металлы / Полимеры
Кат номер: 677426-5G

CAS: -

Характеристики
Описание

Рекомендуемые товары

Phosphor bronze alloy, Cu94Sn6 foil, 25 x 25mm, 0.076mm thickness, as rolled, light tight (lt)

Nickel silver alloy, Cu62Ni18Zn20 200mm tube, 1.8mm outside diameter, 0.28mm wall thickness, 1.24mm inside diameter, as drawn

Cellulose Acetate (CA), metallized film, thickness 0.05 mm, L 2 m, isotactic

Stainless Steel - AISI 304 alloy, FeCr18Ni10 100mm tube, 0.5mm outside diameter, 0.08mm wall thickness, 0.34mm inside diameter, as drawn

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 10mm disks, 0.5mm thickness, annealed

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 50 x 50mm, 0.008mm thickness, not light tested (nlt)

Brass alloy, Cu63Zn37 foil, 8mm disks, 300mm coil width, 0.125mm thickness, half hard

Stainless steel - AISI 304l foil, Fe/Cr18%/Ni 10%, thickness 3.0 mm, size 75 × 75 mm

Molybdenum high temperature alloy tzm, Mo99Ti0.5Zr0.1 foil, 150 x 150mm, 0.52mm thickness, as rolled

Nickel-chromium alloy, Ni80Cr20 200mm rod, 6.3mm diameter

Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 8mm disks, 0.025mm thickness

Polyethylene - Low Density (LDPE), rod, diam. 6.35 mm, L 200 mm, natural

Monel® alloy 400, Ni65Cu33Fe2 500mm tube, 2.0mm outside diameter, 0.175mm wall thickness, 1.65mm inside diameter, as drawn

Stainless steel - AISI 304 foil, Fe/Cr18%/Ni10%, thickness 0.1 mm, size 25 × 25 mm, temper hard

Aluminum-magnesium-silicon alloy, Al98Mg1Si0.6 100m wire, 0.125mm diameter, as drawn

Stainless steel - AISI 304 rod, Fe/Cr18%/Ni 10%, 10.0 mm diameter, length 1000 mm, temper as drawn

Aluminum-magnesium-silicon alloy, Al99Mg0.5Si0.5 5m wire, 0.25mm diameter, as drawn

Tungsten-copper alloy, W72Cu28 sheet, 25 x 25mm, 3.15mm thickness

Alumina foam, thickness 7 mm, size 50 × 50 mm, porosity 0.86

Aluminum-magnesium alloy, Al97Mg3 200mm tube, 1.0mm outside diameter, 0.075mm wall thickness, 0.85mm inside diameter, as drawn

Этот сайт использует cookie. Продолжая пользоваться сайтом, вы даёте своё согласие на работу с этими файлами.