Время работы: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Российский рубль
- EUR
  Евро
- USD
  Доллар США
- No elements found. Consider changing the search query.
- List is empty.
Eng

Главная
Каталог
Металлы / Полимеры
Inconel® alloy 718 - heat resisting alloy, Ni53Fe19Cr19NbMoTi foil, 8mm disks, 0.1mm thickness, annealed

Inconel® alloy 718 - heat resisting alloy, Ni53Fe19Cr19NbMoTi foil, 8mm disks, 0.1mm thickness, annealed

Под заказ

Inconel® alloy 718 - heat resisting alloy, Ni53Fe19Cr19NbMoTi foil, 8mm disks, 0.1mm thickness, annealed

Сроки поставки

Сроки поставки данного товара уточняются.

Производитель: Sigma Aldrich
Артикул: RA-987295
Категория: Металлы / Полимеры
Кат номер: GF63972399-10EA

CAS: -

Характеристики
Описание

Рекомендуемые товары

Alloy 825, Ni39.5Fe32Cr22Mo3Cu2Ti rod, 100mm x 12mm diameter, annealed

Polyethylene - Low Density (LDPE), film, thickness 0.15 mm, size 150 × 150 mm, condition additive free polymer

Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti foil, 8mm disks, 0.015mm thickness, as rolled

Phosphor bronze alloy, Cu94Sn6 1000mm wire, 0.5mm diameter, annealed, straight wire

Stainless steel - AISI 304l rod, Fe/Cr18%/Ni 10%, 25 mm diameter, length 200 mm, temper annealed

Polyaramid (polymetaphenylene isophthalamide), honeycomb, thickness 5 mm, size 300 × 300 mm, cell size 5 mm

Constantan - resistance alloy, Cu55Ni45 foil, 6mm disks, 0.50mm thickness, as rolled

Copper-titanium alloy, Cu56.4Ti43.6 powder, 45micron max. particle size, alloy pre-cursor, 200g

Polyethylene Terephthalate (polyester, PET, PETP), metallized film, thickness 0.1 mm, size 150 × 150 mm, ohms/square 2

Constantan - resistance alloy, Cu55Ni45 1000m wire, 0.25mm diameter, annealed

Manganese-nickel alloy, Mn88Ni12 foil, 50 x 50mm, 0.125mm thickness, as rolled

Tungsten-rhenium alloy, W97Re3 200m wire, 0.05mm diameter, annealed

Aluminum alloy 6082, Al97.4Si1Mg0.9Mn0.7 500mm tube, 6.35mm outside diameter, 1.63mm wall thickness, 3.09mm inside diameter, solution treated

Iron/boron/silicon foil, Fe78%/B 13%/Si 9%, thickness 0.025 mm, length 1 m, coil width 50 mm

Copper-beryllium alloy, Cu98Be2 foil, 25mm disks, 0.05mm thickness, half hard

Aluminum alloy 5056 wire, Al 94.65%/Mg 5%/Mn 0.35%, 0.05 mm diameter, length 5 m, temper hard

Brass alloy, Cu63Zn37 foil, 100 x 100mm, 0.008mm thickness, hard, light tight (lt)

Stainless Steel - AISI 347 alloy, FeCr18Ni10Nb foil, 4mm disks, 0.25mm thickness, annealed

Incoloy® alloy 800 - heat resisting alloy, Ni32.5Cr21Fe 500mm tube, 9.5mm outside diameter, 0.7mm wall thickness, 8.1mm inside diameter, annealed

Invar® - Controlled Expansion Alloy, Fe64Ni36 foil, 10mm disks, 0.0125mm thickness

Этот сайт использует cookie. Продолжая пользоваться сайтом, вы даёте своё согласие на работу с этими файлами.