Время работы: 9:00 – 17:30
E-mail: mail@labstore.ru
RUB
- RUB
  Российский рубль
- EUR
  Евро
- USD
  Доллар США
- No elements found. Consider changing the search query.
- List is empty.
Eng

Gold nanorods 10 nm diameter, Cy3 and streptavidin functionalized, powder

Под заказ

Gold nanorods 10 nm diameter, Cy3 and streptavidin functionalized, powder

Сроки поставки

Сроки поставки данного товара уточняются.

Производитель: Sigma Aldrich
Артикул: RA-760981
Категория: Металлы / Полимеры
Кат номер: 905968-1.75MG

CAS: -

Характеристики
Описание

Рекомендуемые товары

Nickel-chromium alloy, Ni80Cr20 500m wire, 0.125mm diameter, hard

Invar® - Controlled Expansion Alloy, Fe64Ni36 350mm wire, 1mm diameter, annealed, straight wire

Stainless Steel - 17-7PH alloy, FeCr17Ni7 foil, 150 x 150mm, 0.05mm thickness, as rolled - condition c, precipitation hardenable, light tight (lt)

Molybdenum high temperature alloy tzm, Mo99Ti0.5Zr0.1 rod, 50mm x 10.0mm diameter

Polyethylene - U.H.M.W. (UHMW PE), rod, diam. 6.35 mm, L 500 mm, condition machined

Platinum-rhodium alloy, Pt60Rh40 0.2m wire, 0.8mm diameter, as drawn

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 4mm disks, 0.0125mm thickness, hard

Polyethylene - Low Density (LDPE), rod, diam. 101.6 mm, L 200 mm, natural

Copper-beryllium alloy, Cu98Be2 foil, 10mm disks, 0.005mm thickness, as rolled

Polyacrylonitrile-Butadiene-Styrene (ABS), rod, diam. 25 mm, L 200 mm, tolerance +0.2/+1.2 mm

Polyamide - Nylon 6 (PA 6), film, thickness 0.06 mm, size 900 × 900 mm, natural

Polycarbonate (PC), rod, diam. 50 mm, L 1000 mm, condition machining feedstock

Aluminum-magnesium-silicon alloy, Al98Mg1Si0.6 50m wire, 1.0mm diameter, as drawn

Copper/Beryllium insulated wire, Cu98%/Be 2%, conductor diameter 0.075 mm, insulation thickness 0.008 mm, length 10 m

Stainless Steel - AISI 316L alloy, FeCr18Ni10Mo3 50m wire, 0.4mm diameter, as drawn

Brass alloy, Cu63Zn37 500mm tube, 0.76mm outside diameter, 0.25mm wall thickness, 0.26mm inside diameter, as drawn

Quartz - fused tube, outside diameter 9.0 mm, length 100 mm, wall thickness 1.0 mm

Inconel® alloy 718 - heat resisting alloy, Ni53Fe19Cr19NbMoTi foil, 8mm disks, 0.25mm thickness, annealed

Nickel-chromium alloy, Ni80Cr20 foil, 2m coil, 2.5mm coil width, 0.50mm thickness, as drawn

Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 25 x 25mm, 0.005mm thickness, as rolled, not light tested (nlt)

Этот сайт использует cookie. Продолжая пользоваться сайтом, вы даёте своё согласие на работу с этими файлами.